BAIJIAN - Third party testing organization
The specification of I-beam is expressed in centimeters of waist width、 such as the waist width of No.10 I-beam、 which is 10cm. The types of I-beams include hot-rolled ordinary I-beams、 lightweight I-beams、 and wide parallel leg I-beams (H-beams). The waist width of hot-rolled ordinary I-beams in China is 100-630mm、 denoted as No.10-No.63、 and the inclination of the inner wall of the legs is 1:6. The pass system for rolling I-beams includes direct rolling pass system、 oblique rolling pass system、 and mixed pass system. In addition、 special rolling methods can also be used for I-beams. (1) Direct rolling pass system. The direct rolling pass system refers to a pass system in which the two open legs of the I-beam pass are located on the same side of the roll axis、 and the waist is parallel to the roll axis. Its advantage is that the axial force of the roller is small、 the axial movement is small、 and there is no need for a working slope. The pass occupies a small length of the roller body、 and can be equipped with more passes under certain conditions of the roller body length. (2) Cross rolling pass system. This pass system refers to the two open legs of the I-beam pass that are not on the same side of the waist at the same time、 and the waist has an angle with the horizontal axis. (3) Hybrid hole system. According to the characteristics of rolling mills and products、 in order to fully utilize the advantages of their respective systems and overcome their shortcomings、 hybrid pass systems are often used、 that is、 a combination of two or more systems. For example、 the finished hole and the front hole of the finished product use a straight leg diagonal rolling pass system、 while other pass types use a curved leg diagonal rolling system; Alternatively、 a direct rolling system can be used for rough rolling holes、 and the final 3-4 finishing holes can be pierced with straight legs or diagonally. (4) Special rolling method. When it is difficult to roll the required I-beam using the usual rolling method due to certain reasons、 a special rolling method can be used to fully utilize the techniques of uneven deformation and pass design. For example、 when the cross-section of the steel billet is narrow and wider I-beams are required to be rolled、 the wave rolling method can be used; For example、 when the billet is wider and smaller I-beams are required to be rolled、 negative spread rolling can be used
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific、 fair、 and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsinspection and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered、 meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing、 with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle、 low cost、 and attentive service 7. Possess authoritative qualifications such as CMA、 CNAS、 CAL、 etc 8. The testing report is authoritative and effective、 and is generally used in China