BAIJIAN - Third party testing organization
Zhongxingpengguiboli Mozhi Zhusheji PingInjection Vials Made of Moulded Neutral Borosilicate Glass This standard is applicable to neutral borosilicate glass injection bottles that contain directly packaged injections、 sterile powder for injection、 and concentrated solution for injection. 【 Appearance 】 Take an appropriate amount of this product、 place it in a bright natural light、 and visually inspect it. It should be colorless and transparent; The surface should be smooth and flat、 without obvious glass defects; There should be no cracks in any part. 【 Identification 】 "(1) Take an appropriate amount of this product and measure it using the average linear thermal expansion coefficient measurement method (YBB604112012) or linear thermal expansion coefficient measurement method (YBB604202012)、 which should be (4-5) × 10K - '(20-300 ℃). (2) Take an appropriate amount of boron trioxide from this product and measure it using the boron trioxide determination method (YBB604312012). The content of B: O should be between 8% and 12%. 【 Seam Line 】 Take an appropriate amount of this product and use a caliper to test. The seam line at the bottle mouth should not exceed 0.1mm when measured as protruding、 and the seam line at other parts should not exceed 0.2mm when measured as protruding. 【 121 ℃ Particle Method Water Resistance 】 Take an appropriate amount of this product and measure it according to the glass particle water resistance test method at 121 ℃ (YBB60452012)、 which should meet level 1. 【 98 ℃ Particle Method Water Resistance 】 Take an appropriate amount of this product and measure it according to the glass particle water resistance test method at 98 ℃ (YBB60112012)、 which should meet the HGB1 level. 【 Inner Surface Water Resistance 】 Take an appropriate amount of this product and measure it according to the 121 ℃ Inner Surface Water Resistance Test Method (YBB60442012)、 which should meet the HC1 level
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific、 fair、 and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsinspection and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered、 meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing、 with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle、 low cost、 and attentive service 7. Possess authoritative qualifications such as CMA、 CNAS、 CAL、 etc 8. The testing report is authoritative and effective、 and is generally used in China