BAIJIAN - Third party testing organization
1 Scope
This standard specifies the limits, control technical requirements, and detection methods for oil and gas emissions during the storage, receipt, and delivery of gasoline in oil storage depots. This standard is applicable to the management of gasoline and gas emissions from existing oil storage depots, as well as the environmental impact assessment, design, completion acceptance, and gasoline and gas emissions management after the completion of new, renovated, and expanded oil storage projects
2 Normative References
The content of this standard refers to the clauses in the following documents.
. For undated references, their valid versions are applicable to this standard. GB 50074 Design Specification for Petroleum StorageGB/T 16157 Determination of Particulate Matter and Sampling Method for Gaseous Pollutants in Exhaust Gas from Fixed Pollution Sources H/T 38 Determination of Non methane Total Pollutants in Exhaust Gas from Fixed Pollution Sources Gas Chromatography
3 Terms and Definitions
The following terms and definitions apply to this standard. 3.1
Tank gasoline terminal
A place (including a refinery) composed of oil storage tanks and used to receive and receive gasoline through pipelines, ships, or tank trucks.
. 3.2Oil and Gas Gasoline Vapor
The volatile organic gas (non methane total flow) generated during the storage, loading and unloading of gasoline in oil storage depots. 3.3
Vapor emission concentration
Under standard conditions (temperature 273K, pressure 101.3 kPa), the mass of non methane total flow per cubic meter of dry gas emitted, in g/m '
3.4
Dispensing gasoline loading
Load the oil from the storage tank into the tank truck.
. 3.5Collect oil and inject oil into the storage tank of the oil storage depot. 3.6
Bottom loading
Transfer oil from the bottom of the tank of the oil tanker into the tank.
. 3.7Floating roof tank
A tank with a floating roof cover on the oil surface, including an inner floating roof tank and an outer floating roof tank.
. 3.8Oil and gas recovery and treatment device
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific, fair, and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsBAIJIAN inspection and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered, meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing, with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle, low cost, and attentive service 7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc 8. The testing report is authoritative and effective, and is generally used in China