Physical performance testing of testing items: including tensile strength、 yield strength、 elongation、 fracture elongation、 hardness、 etc. Diameter measurement: Determine whether the traction rope meets the requirements by measuring the diameter size. Flattening degree detection: Check the flattening degree of the traction rope、 and check if there are any damages、 wear、 and other issues with the traction rope. Steel wire rope roller compactness inspection: Check whether the compactness of the rope core and rope flesh meets the standard requirements. Surface quality inspection: Determine whether the standard requirements are met by checking the surface for damage、 broken strands、 exposed steel wires、 and other issues. Fatigue performance testing: By simulating the continuous bending and stretching effects of the traction rope during use、 observe whether it is fatigued and damaged. Chemical composition testing: Check whether the material and chemical composition of the steel wire meet the standard requirements. Magnetic particle inspection: Use magnetic particle inspection technology to detect whether there are defects inside the steel wire rope、 such as broken strands、 cracks、 fatigue、 etc. Edge detection: Check if the rope head and rope tail are straight and regular、 ensuring that each wire strand of the rope is not loose or rotating. Tensile testing: Conduct tensile testing with professional equipment to check whether the strength of the traction rope meets the requirements. Inspection scope: steel wire rope、 polyester rope、 nylon rope、 polyethylene rope、 polypropylene rope、 single strand rope、 double layer rope、 three-layer rope、 twisted strand rope、 pallet rope、 lifting rope、 anchor chain、 cableway rope、 cable frame rope、 steel wire rope、 fabric belt、 flat steel、 plastic products、 flat rope、 round rope、 twisted rope、 belt rope、 ribbed rope、 angle rope、 etc. Relevant reference standard specifications BS AU 187-2000 (R2011): Traction rope assemblies for passenger cars and light cargo vehicles BS AU 188-1983: Specification for fixing traction ropes、 cables、 and poles for road vehicles BS AU 188-1983 (R2003): Specification for fixing traction ropes、 cables、 and poles for road vehicles BS EN 12927-3-2004: Safety requirements for cableway devices for carrying passengers - Ropes -6-strand traction steel wire ropes Long insertion rope method for conveyor and traction ropes DL/T 1079-2016: Anti torsion steel wire ropes for tension pay-off of transmission lines FZ/T 63050-2019: Purpose of handling inspection reports for insulated electric traction ropes: 1. Evaluate the quality of products; 2. Determine the product quality level、 i.e. the severity of defects; 3. Inspect the process flow and supervise the process quality; 4. Collect、 statistics、 and analyze quality data to lay the foundation for quality improvement and management activities; 5. Introduce arbitration inspection to determine the responsibility for quality accidents. The purpose of handling third-party testing reports is to obtain an independent、 objective、 and professional evaluation result to confirm whether the tested items or services comply with relevant regulatory standards、 quality requirements、 or technical specifications、 and to verify their safety、 reliability、 and performance. Third party testing reports are typically used in areas such as product certification、 market access、 supply chain management、 trade negotiations、 and dispute resolution. Precautions for Testing Report: Carefully read and understand each section after receiving the testing report. Ensure that there is a "research and testing special seal" and official seal in the report、 and check the anti-counterfeiting QR code to confirm its effectiveness. Confirmation information: Verify whether personal or organizational information is accurate and accurate. If the report is not stamped with the "Research and Testing Special Seal" or official seal、 it is invalid. Pay attention to the test results: Focus on the summary and detailed information of the test results. If in doubt、 consult relevant engineers and it is strictly prohibited to alter the report. Pay attention to the reference range: Check the reference range of the test results to see if the results are normal. As the reference range varies depending on factors such as samples、 test methods、 reference standards、 etc.、 please contact our engineers to discuss your specific situation. Objection handling: If you have any objections to the test report、 please file an appeal within 15 days of receiving the report. Late appeals will not be accepted. The above article is a partial list. For more testing needs and details、 please consult the online consultant of the free consulting agency: 18501763637

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

inspection and testing process:

1. Telephone communication and confirmation of requirements

Testing and testing characteristics:

1. The testing industry is fully covered、 meeting different testing needs

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing、 with no testing fees charged

5. Self service order delivery for free on-site sampling