Inspection items: Ropeway structure inspection: Check whether all parts of the cableway are intact、 such as steel cables、 bridge、 carriages、 winches、 etc.、 to ensure that they meet safety requirements. Cableway operation inspection: Check whether all aspects of the cableway operation are smooth、 such as motors、 brakes、 hooks、 etc.、 to ensure the safe and stable operation of the cableway. Electrical equipment inspection: Check whether the electrical equipment of the cableway is safe and reliable、 such as cables、 switches、 junction boxes、 etc.、 to ensure that they meet safety standards. Personnel safety inspection: Check whether the personnel safety equipment of the cableway meets the standards、 such as safety belts、 safety hooks、 emergency equipment、 etc.、 to ensure the safety of passengers during operation. Environmental inspection: Check whether the environment around the cableway meets the specifications、 such as climate conditions、 terrain、 etc.、 to ensure the safe operation of the cableway. Detection range: Cable-pull cable cars are usually used in mountainous areas. Steel cables are pulled and suspended by cables to move the carriage、 and are generally used in tourism、 engineering construction、 or material transportation fields. Turntable cable car: The turntable cable car is built in downtown areas or tourist areas. It can travel along tracks near the ground or hang high on poles and towers、 and the carriage is generally circular or polygonal. Suspended cable cars: Suspended cable cars are divided into rotatable and non rotatable types、 such as the Feitian Express on the top of a hotel building、 which can fly from the first floor to the fifth floor、 allowing tourists to capture a panoramic view of the city. Relevant reference standard specifications GB/T 9075-2008: Steel wire rope inspection and scrapping specifications for cableways 6GB/T 12141-2008: Safety specifications for freight aerial cableways 7GB 12352-2018: Safety specifications for passenger aerial cableways 8GB/T 12738-2006: Ropeway terminology GB/T 19401-2003: Technical specifications for passenger towing cableways GB 21008-2007: Safety requirements for underground mining aerial cableways GB/T 24728-2009: Safety service quality for passenger cableways GB/T 24729-2009: Fixed holding cables for passenger cableways General Technical Conditions for Equipment GB/T 24730-2009: General Technical Conditions for Detaching and Holding Ropes of Passenger Cableways GB/T 24731-2009: General Technical Conditions for Driving Devices of Passenger Cableways GB/T 24732-2009: General Technical Conditions for Holding (Pressing) Rope Wheels of Passenger Cableways Purpose of Handling Inspection Reports 1. Evaluate the Quality of Products; 2. Determine the product quality level、 i.e. the severity of defects; 3. Inspect the process flow and supervise the process quality; 4. Collect、 statistics、 and analyze quality data to lay the foundation for quality improvement and management activities; 5. Introduce arbitration inspection to determine the responsibility for quality accidents. The purpose of handling third-party testing reports is to obtain an independent、 objective、 and professional evaluation result to confirm whether the tested items or services comply with relevant regulatory standards、 quality requirements、 or technical specifications、 and to verify their safety、 reliability、 and performance. Third party testing reports are typically used in areas such as product certification、 market access、 supply chain management、 trade negotiations、 and dispute resolution. Precautions for Testing Report: Carefully read and understand each section after receiving the testing report. Ensure that there is a "research and testing special seal" and official seal in the report、 and check the anti-counterfeiting QR code to confirm its effectiveness. Confirmation information: Verify whether personal or organizational information is accurate and accurate. If the report is not stamped with the "Research and Testing Special Seal" or official seal、 it is invalid. Pay attention to the test results: Focus on the summary and detailed information of the test results. If in doubt、 consult relevant engineers and it is strictly prohibited to alter the report. Pay attention to the reference range: Check the reference range of the test results to see if the results are normal. As the reference range varies depending on factors such as samples、 test methods、 reference standards、 etc.、 please contact our engineers to discuss your specific situation. Objection handling: If you have any objections to the test report、 please file an appeal within 15 days of receiving the report. Late appeals will not be accepted. The above article is a partial list. For more testing needs and details、 please consult the online consultant of the free consulting agency: 18501763637

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

inspection and testing process:

1. Telephone communication and confirmation of requirements

Testing and testing characteristics:

1. The testing industry is fully covered、 meeting different testing needs

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing、 with no testing fees charged

5. Self service order delivery for free on-site sampling