BAIJIAN - Third party testing organization
EN 45545-2 R19 is applicable to testing the flammability、 combustion、 smoke production、 toxic gas content、 and other fire and flame retardant properties of personnel seat products.
The latest mandatory fire protection standard EN 45545-2:2010- Introduction to the standard
EN 45545-2:2010 was prepared by Technical Committee CEN/TC 256 "Railway Applications". This European standard should obtain the status of a national standard by publishing the corresponding text or endorsement no later than February 2021、 The conflicting national standards should be withdrawn by February 2021 at the latest
According to the latest standard EN45545-2:2010、 materials are classified into 28 categories、 including R1-R28、 based on their ultimate use; According to the risk level of vehicle operation、 three fire risk levels were divided: HL1、 HL2、 and HL3
EN 45545-2 Standard Name:
EN 45545-2 Railway Applications - Fire Protection of Railway Vehicles - Part 2: Fire Protection Requirements for Materials and Components
EN 45545-2 R19 Sample Requirements:
100 mm x 100 mm、 sample thickness less than 50mm. For tests where the actual thickness of the sample is less than 6mm、 the actual substrate used for the sample should be brought with it so that its overall thickness is not less than 6mm
EN 45545-2 R19 Test Method:
ISO5660-1 Reaction to Fire Test - Heat Release、 Smoke Production、 and Mass Loss Rate - Part 1: Heat Release Rate (Cone Calorimeter Method)
ISO5660-1 Reaction to Fire Tests Heat Release、 Smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method). Three samples were tested under each different radiation strip. The radiation level in EN45545-2 R19 standard is 25 kW/m2
Function of testing report:
1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report
2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms 3. Used as a sales report: issuing legally effective testing reports to make consumers more confident 4. Papers and research: Provide professional personalized testing needs 5. Judicial services: providing scientific、 fair、 and accurate testing data 6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problemsinspection and testing process:
1. Telephone communication and confirmation of requirements
2. Recommend solutions and confirm quotations 3. Mail samples and arrange testing 4. Progress tracking and result feedback 5. Provide reports and after-sales service 6. If urgent or priority processing is requiredTesting and testing characteristics:
1. The testing industry is fully covered、 meeting different testing needs
2. Fully cover the laboratory and allocate localized testing nearby3. Engineers provide one-on-one services to make testing more accurate
4. Free initial testing、 with no testing fees charged
5. Self service order delivery for free on-site sampling
6. Short cycle、 low cost、 and attentive service 7. Possess authoritative qualifications such as CMA、 CNAS、 CAL、 etc 8. The testing report is authoritative and effective、 and is generally used in China